| |
|
Round tubular copper heating elements |
 |
|
- Hot water tanks and additional heating elements for boilers
Heating elements with an output of 1800 W to 2200 W for electric
hot water supply for 5 l and 10 l hot water tanks for household and office
use and additional electric heaters for large boilers from
30 l with an output to meet customer requirements.
|
 |
|
- Water heaters
Heating element for the fast and energy-saving heating of specified water quantities with an output of 1800 W to 2200 W.
|
 |
|
- Continuous-flow heaters
Highly-effective heating element for the immediate heating of running
water - for example for hand wash basins, sinks, showers and also for
industrial applications.
Stainless steel models available on request.
|
| |
|
|
| |
|
Round tubular stainless steel heating elements |
 |
|
- Continuous-flow heaters for industrial use
The unit consist of housing from stainless steel in that mounted
screw-in heater or firm brazed heating elements.
Length of housing: 320
mm – 1020 mm
Power: 3
kW – 12 kW
|
 |
|
- Flange radiators
Flange radiators are designed for industrial application.
They enable high electric heating performance in restricted installation spaces. A special selection of materials, electrical parameters, design and regulation takes place according to the application area.
|
 |
|
- Heaters for steam generators and tempering devices
Heaters with extremely high surface loads in the output range from 2 kW to 40 kW designed for concrete applications. These heaters are used among other things for autoclaves or in direct tool heating systems in the plastics industry.
|
|
|
- Screw-in heating elements
Heating elements with an output of 1800 W to 2200 W for electric water heating for 5 l and 10 l hot water tanks for household and office use and additional electric heaters for large boilers from 30 l with an output to meet customer requirements.
The stainless steel screw-in heating elements are manufactured in a protective gas atmosphere by means of furnace soldering using nickel-based solder, which substantially improves corrosion protection.
The standard model has a screw connection with
G 1 1/2" thread. Other thread sizes are possible due to the use of special brass heads, such as G 3/8" to 2 1/2".
The standard model of the regulator and limiter has the following temperature range:
- Temperature regulator 30 °C . 95 °C with and without frost protection stage
- Temperature limiter 110 °C . 120 °C
Depending on the application case, material structures with copper elements can also be used.
|
 |
|
- Insulated installation - for use in enamelled boilers
There is no conductive connection between the tubular heating
elements from Incoloy and the water boiler. The installation will be
taken place in conjunction with a protection current leak resistor.
As a result of insulated installation are clearly delayed calcification
of the heating surfaces and prevention of electrochemical corrosion.
Preferred
length (depth of immersion): 320
mm – 780mm
Power: 1,
5 kW – 9 kW
|
 |
|
- Indirect heating of stainless steel containers
Due to the indirect heating of containers, calcification on the heating elements are avoided and the cleaning of the container is thus substantially facilitated. They are mainly used in canteen kitchens, mobile kitchens and vehicle equipment as well as in special industrial applications.
|
| |
|
|
| |
|
Flat tubular heating elements |
 |
|
Flat tubular heating elements with
an external size of 11.5 mm x 6.2 mm are manufactured up to a length
of 1500 mm.
They can be delivered as a long or shaped element. The advantage is
the relatively small installation size and the electrical connection
on one side only.
|
| |
|
|
| |
|
Ceramic sectional radiators |
 |
|
Ceramic sectional radiators are ideal for the direct heating of all types of fluids due to the uncomplicated exchange of the heating inserts. Dismantling of the inserts is possible without draining off the medium. For ceramic heaters the heat conductor is placed in the grooves of the ceramic element. The ceramic elements are available in sizes Ø 31.5; 36.5; 45; 57 and 70 mm. |
| |
|
|
| |
|
Up |
